Industrial Sanitary Diaphragm-Seal Stainless Steel Proof Pressure Gauge
Industrial Sanitary Diaphragm-Seal Stainless Steel Proof Pressure GaugeTo enlarge the using range of all kind of the uni
Send your inquiryDESCRIPTION
Basic Info
Model NO. | YTP-60BF-ML |
Application | Industrial, Civil |
Structure | Spring Pressure Gauge |
Connection Type | Radial Direction |
Function | Local Indication Type |
Installation Structure | Direct Mounting |
Features of Measurement Medium | Corrosion Resistant |
Indicating Pressure Reference | General Pressure Gauge |
Transport Package | Special Packaging |
Specification | 100mm |
Trademark | Hongqi |
Origin | Zhejiang, China |
HS Code | 9026209090 |
Production Capacity | 50000PCS/Yr |
Product Description
Industrial Sanitary Diaphragm-Seal Stainless Steel Proof Pressure GaugeTo enlarge the using range of all kind of the universal pressure gauge, and make it suited for measuring the pressure of the service medium which is high corrosive and easily crystallized, or the medium which has floating solid. And in order to prevent some service medium from entering the universal pressure gauge or to be easy for clear the place where the precipitation is resistanced, there must have a diaphgram pressure gauge which is made up of a diaphragm-seal and a universal pressure gauge. The diaphgram gauge is mainly used in oil industry, chemical industry, pharmacy industry and so on.The diaphragm pressure gauge is made up of univesal pressure gauge and the different structure diaphragm to be as a airproof system, and the pressurized liquid is filled. When diaphragm the service medium act on the diaphragm and make it move, the pressurized liquid is compessoned. And the flexibility parts will be moved caused by the instinctive character of the pressurized liquid and the pointor point it out on the dial. And when the rigidity of the diaphragm is small enough, the pointing measurement is nearly the same as the service medium pressure.Temperature character of diaphragm pressure gauge.Because the pressurized liquid was filled in the diaphragm pressure gauge as the medium which send the pressure, the temperature influence of the diaphragm pressure gauge is relative with the expansion coefficient of the pressurized liquid, the rigidity of the diaphragm, and the temperature of the pressure burdened part. Especially to the low measuring range the influence is obvious. Usu-ally the pressure burdened part error is no more than 0.1%/C. So the temperature influence of diaph-ragm pressure gauge is made up of the universal pressure gauge and temperature influence of the pressure burdened part of the diaphragm.The anti-corrosive character of the pressure gauge.The anti-corrosive character of the pressure gauge will be assuredby selecting the suitable diaphragm which touch with the service medium,flange and gasket.To make diaphragm pressuge gauge reliable and safe, the pressurized liquid should be selected according to different use.Sealing liquid | Burden part temperature | Density(g/cm3) | Coefficient of volume expand | Use |
High viscosity silicon oil | -10~200ºC | 1.07 | 0.95x10 Negative cube | High temperature industry |
Low viscosity silicon oil | -30~100ºC | 0.94 | 1.08x10 Negative cube | General use |
Glycerin liquid | -5~100ºC | 1.27 | 0.61x10 Negative cube | Food industry |
Vegetable oil | -5~100ºC | 0.93 | 1.03x10 Negative cube | Food industry |
Fluovin oil | -30~150ºC | 1.93 | 0.75x10 Negative cube | Hydrogen,Oxygen |
1,Opening type convexity flange
Code | The up limit(MPa) | Standard recommend flange | The dimension of male face flange (mm) | Dimension figure | ||||||
D | K | d | f | L | C | B | ||||
MF1 | 4 | JIS-10/20K 50A | 155 | 120 | 100 | 3 | 19 | 18 | 50 | figure 1 |
4 | 50-1.0/4.0HGJ46 | 160 | 125 | 100 | 3 | 19 | 18 | 50 | ||
4 | ANSI-2B 150Ib | 152 | 121 | 92.1 | 3 | 19 | 18 | 2" | ||
4 | ANSI-2B 300/100Ib | 165 | 127 | 92.1 | 3 | 19 | 18 | 2" | ||
6~10 | 25-10.0HGJ47 | 125 | 89 | 50.8 | 7 | 20 | 20 | 25 | figure 2 | |
6~10 | 50-10.0HGJ47 | 165 | 127 | 92.1 | 3.5 | 20 | 26 | 50 | ||
16~25 | 20-25.0HGJ53 | 130 | 89 | 43 | 7 | 22 | 20 | 25 | ||
MF | 4 | 25-4.0 DIN | 115 | 85 | 65 | 3 | M12 | 26 | 25 | figure 3 |
I-shape convexity flange[code MG] The up limit:≤4MPa (Unit:mm)
Recommend flange code | Dimension | ||||
DN | D1 | K | d2 | L | |
JSI-10/25K 25K | 25 | 125 | 90 | 70 | 19 |
JSI-10/25K 25K | 20 | 100 | 75 | 58 | 15 |
JSI-10/25K 25K | 15 | 95 | 70 | 52 | 15 |
ANSI-1B-15IB | 1" | 108 | 79.4 | 50.8 | 15.7 |
ANSI-1B-300/600Ib | 1" | 124 | 88.9 | 50.8 | 19.1 |
20-1.0/4.0HGJ47 | 20 | 105 | 75 | 56 | 14 |
FAQ:
Q: Are you trade company?
A:No , we have over 700 staffs in our factory which has 28 years professional production experience.
Q:Can you do OEM services?
A:No problem.
Q:Are you able to provide customized service for non-standard applications?
A:Yes, We have a professional R&D team can customize dial, thread, case....based on customer requirements.
Q:Do you have technical drawings or data sheets of your instruments?
A:Yes, we can supply upon customer's request, please contact with the sales.
Q:How about the delivery time?
A:The delivery time is 10-45days depends on the products type and quantity.
Q:Do you inspect the products before shipment?
A:Our QA department will have 100% inspection before shipping.
Q:What is your warranty?
A: 1Year warranty.
Please feel free to send inquiry to us for more details of this product or other products in our showroom!